Products
PRODUCT QUICKLIST

   
Our Products » Honeywell » Maxon Combustion System » Ratio & Flow Control »
Ratio & Flow Control Gas Valves Mixers & Mixing Tubes

MAXONS's Mixers and Mixing Tubes are ideal for producing very uniform mixtures of fuels and air for almost any industrial gas burner, low NOx burner or process application. Built with typical MAXON durability, they provide years of maintenance free operation. A wide variety of control options, sizes and configurations provide flexibility for almost any application or design requirement.
1. HG Mixing Tubes
Using the kinetic energy of higher gas pressures, the Series "HG" Mixing Tube provides a thoroughly blended air/gas mixture. The higher gas pressure allows use of a lower pressure combustion air blower.

In combination with a MAXON MICRO-RATIO® flow control valve and combustion air blower, the "HG" Mixing Tube can provide localized mixing of air and fuel to single or multiple industrial burner systems. Adjustment is simple through single point proportioning.

2. LG Mixing Tubes
Series "LG" Mixing Tubes provide thorough blending of the air/gas mixture for all MAXON premix industrial burner systems. Most clean, low pressure gases may be used. When combined with a combustion air blower and MAXON MICRO-RATIO® flow control valve, the "LG" Mixing Tube can offer localized mixing of pre-proportioned air and fuel to single or multiple burner systems. A wide range of capacities provides application flexibility.

3. MG Mixing Tubes
  • Air/fuel gas mixing devices for use with all MAXON burner systems to provide thorough blending of air/gas mixture.
  • Mixing tubes are available for mixing air/natural gas, tubes with special inserts for air/LPG, and any other combination of gasses.
  • Operates with low air and fuel pressures.
  • May be used with single or multiple burner systems.
  • The mixing tubes combine fuel jet mixing, vortex mixing and swirl mixing to guarantee best mixture homogeneity.
  • Flanged air inlet and mixture outlet to meet the most stringent codes for fuel gas piping connections.
  • 100 % carbon steel, optional available in 100 % stainless steel.

4. Multi Ratio Mixers
Thorough blending of the air / gas mixture for all MAXON premix burner systems is provided in our Multi Ratio Mixing Tubes. Most clean, low pressure gases may be used in these mixers. These Mixing Tubes can offer localized mixing of pre-proportioned air and fuel to single or multiple industrial burner systems. A wide range of capacities provides flexibility within your applications.

5. PREMIX® Blower Mixers
PREMIX® Blower Mixers provide a convenient, flexible method of supply premixture for a variety of industrial burners. Air for combustion is drawn in through the ratio valve where it can be throttled. That same ratio valve includes a gas butterfly valve cross linked to the air valve. A multiple-screw cam design permits fuel flow to be matched to air flow at each firing position. This gives excellent control and allows on-ratio firing through wider operating ranges than venture mixers can provide.

6. VENTITE™ Inspirators
VENTITE™ Inspirators provide a low-cost means of supplying air/gas mixture to premix-type gas burners. Gaseous fuel under high pressure is introduced through a drilled spud orifice into the venturi throat, pulling in a proportional amount of combustion air. The air and gas are mixed and may be used to supply most premix-type industrial burner nozzles.
 
Copyright © 2009-2024 Nationwide Oil & Gas Sdn Bhd (573654-D). All Rights Reserved